Dremel 9903 1-1/4-in Tungsten Carbide Cutter - Each

Tungsten carbide cutter. 1/8 in. For rotary tool. Ideal for shaping, smoothing or removing material. Use on hardened steel, stainless steel, cast iron, nonferrous metal, fired ceramics, plastics, hardwoods and other hard materials. Use with #236 hand piece. Do not run over 30,000 RPM.

Shapes, smoothens or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woodsA high-speed cutter made of tungsten carbide, the hardest material next to diamondsMaterial: Tungsten carbideCan Be Used on Cast Iron: YesCan Be Used on Castings: NoCan Be Used on Cement Board: NoCan Be Used on Ceramic: YesCan Be Used on Ceramic Wall Tile: NoCan Be Used on Chain Saw Blade: NoCan Be Used on Chrome: NoCan Be Used on Concrete: NoCan Be Used on Copper: NoCan Be Used on Cork: NoUse the sides of the cutter (rather than the tip) for effective cuttingCan Be Used on Drywall: NoCan Be Used on Epoxy: NoCan Be Used on Ferrous Metal: NoCan Be Used on Fiberglass: NoCan Be Used on Gemstone: NoCan Be Used on Glass: NoCan Be Used on Gold: NoCan Be Used on Grout: NoCan Be Used on Hardened Steel: NoCan Be Used on Hardwood: YesCan Be Used on Metal: YesCan Be Used on Jewelry: NoCan Be Used on Laminate: NoCan Be Used on Leather: NoCan Be Used on Marble: NoCan Be Used on Metal Solder: NoCan Be Used on Nonferrous Metal: YesCan Be Used for Paint Removal: NoCan Be Used on Particle Board: NoCan Be Used on Pewter: NoCan Be Used on Plastic: YesCan Be Used on Acrylic: NoCan Be Used on Plywood: NoCan Be Used on Porcelain: NoCan Be Used on Precious Metal: NoCan Be Used on Pumpkin: NoCan Be Used on PVC: YesCan Be Used on Rivets: NoCan Be Used for Rust Removal: NoCan Be Used on Shell: NoCan Be Used on Silver: NoCan Be Used on Silverware: NoCan Be Used on Aluminum: NoCan Be Used on Soft Metal: NoCan Be Used on Softwood: NoCan Be Used on Stainless Steel: NoCan Be Used on Steel: NoCan Be Used on Stone: NoCan Be Used on Styrofoam: NoCan Be Used on Terra Cotta: NoCan Be Used on Vinyl Siding: NoCan Be Used on Wood: NoShapes, smooths or grinds especially hard materials including: hardened-steel, stainless-steel, cast-iron, nonferrous metals, fired ceramics, plastics and hard woodsCan Be Used on Brass: NoA high-speed cutter made of tungsten carbide, the hardest material next to diamondsUse higher speeds for hard woods, slower speeds for metals and very slow speeds for plasticsUse the sides of the cutter (rather than the tip) for effective cuttingDo not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutterThe tungsten carbide surface can easily catch the side of a hole and break the bitInsert the accessory bit all the way into the tool and then back it out slightly before tightening downThis provides plenty of shank for the collet or chuck to hold onto the bitUse higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact)Bit Diameter: 1/8"Shank Diameter: 1/8"Can Be Used on Brick: No
Specifications - Application
Cutting
For Use on Ceramic
Yes
For Use on Concrete
No
For Use on Drywall
No
For Use on Glass
Yes
For Use on Grout
No
For Use on Metal
Yes
For Use on Plastic
Yes
For Use on Wood
Yes
Material
Tungsten carbide
Total Number of Pieces
1
Type
Bit
+ Show all